Products
1/2X8 BLACK IRON NIPPLE
LDR 302 12X8 Black Pipe Nipple 1/2-Inch X 8-Inch. 1/2-Inch X 8-Inch Black Malleable Pipe nipple. Hydrostatic tested and Protected from corrosion with varnish.
$3.79/EACH
$3.79/EACH
$3.79/EACH
$3.79/EACH
1/2 X 8 GALVANIZED NIPPLE
The MUELLER GLOBAL 1/2 in. x 8 in. Galvanized Steel Nipple has a male-threaded connection and complies with ANSI B1.20.1 standards.
$3.99/EACH
$3.99/EACH
1X5 GALV NIPPLE
LDR 301 1X5 Galvanized Pipe Nipple 1-Inch X 5-Inch. 1-Inch X 5-Inch Galvanized Malleable Pipe nipple. Hydrostatic tested and Protected from corrosion with varnish.
$4.29/EACH
$4.29/EACH
1X6 GALV NIPPLE
LDR 301 1X6 Galvanized Pipe Nipple 1-Inch X 6-Inch. 1-Inch X 6-Inch Galvanized Malleable Pipe nipple. Hydrostatic tested and Protected from corrosion with varnish.
$4.59/EACH
$4.59/EACH
C624-3/4IN COPPER TUBE STRP 5PK
Copper solder joint pressure fittings are used above ground for water supply piping. These fittings rely on a force or pressure to maintain flow.
$4.99/EACH
$4.99/EACH
1/2X12 GALV NIPPLE
This 1/2" x 12" galvanized pipe nipple is designed for use with drinking water.
$4.99/EACH
$4.99/EACH
44905/50005 CPVC TUBING 1/2"X10'
High-Temperature Domestic Water Supply Used In Hot And Cold Water Pressure Applications, From Water Main To Fixtures. For Hot Water Distribution Systems Up To 180 Degrees Fahrenheit At 100 PSI.
$5.45/EACH
$5.45/EACH
1/2"X2' TYPE M COPPER PIPE
Used For General-Purpose Residential Plumbing To Run Water Line From Service Entrance Through House Or Building To Bathrooms, Kitchen Sinks, Etc.
$5.99/EACH
$5.99/EACH
$7.99/EACH
$7.99/EACH
33401 PLASTIC TEST PLUG 2IN
Plastic Mechanical Plug Designed To Hold Higher Pressures. Used For Plugging Open Ended Piping As Protection From Dirt, Dust, Or Debris.
$7.99/EACH
$7.99/EACH
33402 PLASTIC TEST PLUG 3IN
Plastic Mechanical Plug Designed To Hold Higher Pressures. Used For Plugging Open Ended Piping As Protection From Dirt, Dust, Or Debris. Maximum Allowed Air Is 5 PSIG
$7.99/EACH
$7.99/EACH
44910/50007 CPVC TUBING 3/4"X10'
High-Temperature Domestic Water Supply Used In Hot And Cold Water Pressure Applications, From Water Main To Fixtures. For Hot Water Distribution Systems Up To 180 Degrees Fahrenheit At 100 PSI.
$9.28/EACH
$9.28/EACH
33403 PLASTIC TEST PLUG 4IN
Plastic Mechanical Plug Designed To Hold Higher Pressures. Used For Plugging Open Ended Piping As Protection From Dirt, Dust, Or Debris. Maximum Allowed Air Is 5 PSIG
$9.99/EACH
$9.99/EACH
3/4"X2' TYPE M COPPER PIPE
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc.
$9.99/EACH
$9.99/EACH
$10.99/EACH
$10.99/EACH
WTR HEATER CONN SS HOSE 3/4X12" U3088FLEX12LF SHARKBITE
Used In Residential And Commercial Applications To Connect The Hot And Cold Supply Lines To The Water Heater. Connections Are 3/4" FIP X 3/4" SharkBite.
$11.99/EACH
$11.99/EACH
$11.99/EACH
$11.99/EACH
1/2X36 BLK NIPPLES
With Thread Protection On All Pipe Thread. Size In : 1/2 X 36
$11.99/EACH
$11.99/EACH
FSDP-EO STORM DRAIN END OUTLET
End Outlet Slides Into The Female End Of The Channels. It Also Has Tabs To Fit Into The Male End Of The Channels Or The Cut-To-Length End Of The Channels.