In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrade cut quality and lead to tool breakage. A single-flute bit should be used where cut speed is more important than cut finish. Making one cut per revolution is faster than making two or three. Improved chip clearance is possible with a single flute configuration. The result: fast cuts.

Used to change direction in piping. Conforms to ASTM D2466.

• This 45-deg white elbow is a standard weight pressure fitting for I.P.S
• standard Schedule 40 pressure pipe
• Pipe solvent welds into both ends
• S x S

Carbide Router Bit, Flush Trim With Top and Bottom Bearings, 1/4" Shank, 1/2" Carbide Diameter, 1/4" Bearing Diameter, 1-1/4" Carbide Height, 2 Flutes manufactured by Freud America.

These bits cut smoother than other straight bits because of the precise shear and hook angle. End of bit relief allows for fast plunging.

Application:

• Cuts all composition materials, plywood, hard wood, and soft wood
• Use on CNC and other automatic routers as well as hand held and table mounted portable routers

Can be used to cut materials like this: plywood, hardwood and soft wood.This Router Bit is double straight flute type, fast for wood cutting use.

Specially treated blade to ensure a fast,sharp, precise cutting and long lasting.The Single Flute Straight Router Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration.Useful for a wide variety of applications including grooves, dados, joint making, and general purpose stock removal.

Specially treated blade to ensure a fast,sharp, precise cutting and long lasting.The Single Flute Straight Router Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration.Useful for a wide variety of applications including grooves, dados, joint making, and general purpose stock removal.