Products
$1.79/EACH
$1.79/EACH
1 IN PLASTIC CAP 2000CT
Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe.
$25.59/EACH
$25.59/EACH
1000016 HIDFST ATTCHMNT FOR GRVD DECKING
The Joist Attachment is to be used with pre-grooved decking. The Attachment can adjust to work with almost any pre-grooved board. The Attachment can adjust in very fine increments.
$69.69/EACH
$69.69/EACH
10312 50LB 12D CEMT COAT SINKER
Head designed to sink flush with surface. VC coating lubricates wood, holds fast in framing. Easy driving for sturdy, permanent construction.
$89.89/EACH
$89.89/EACH
10662 50# 8IN H.DIPPED SPIKES APPROX 190/BX
Great choice for securing railroad ties. The spike nails are rust- and weather resistant.
$108.79/BOX
$108.79/BOX
10664 50# 10IN H.DIPPED SPIKE APPROX 145/BX
Use to secure railroad ties Made of steel Resists rust and weathering Hot-galvanized finish Log construction
$108.79/BOX
$108.79/BOX
10666 50# 12IN HOT DIPPED SPIKE APPROX 125/BX
Used to secure railroad ties, landscaping timbers and thick members used in log home construction.
$108.79/BOX
$108.79/BOX
10896 1-1/2 PLST CAP 2000CT
Round plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, etc.
$28.19/EACH
$28.19/EACH
10C1 1LB 10D BTR COMMON
Prime Source Bright Common Nails are used for construction, carpentry, & framing. Smooth, uncoated shank provided greater strength.
$5.49/EACH
$5.49/EACH
10C5 5LB 10D COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than
$18.19/EACH
$18.19/EACH
10CTDSKR1 1LB 10D CC SINKERS
Sinker nails are used to fasten plywood flooring. They are countersunk and lie flush against the workpiece. Steel is strong and durable but less corrosion resistant than stainless steel.
$5.29/EACH
$5.29/EACH
10CTDSKR5 5LB 10D CC SINKERS
Sinker nails are used to fasten plywood flooring. They are countersunk and lie flush against the workpiece. Steel is strong and durable but less corrosion resistant than stainless steel.
$18.39/EACH
$18.39/EACH
10CUTMAS1 1LB 10D HARD CUT
For nailing hardwood flooring to concrete sub-floors The point is squared off to prevent the flooring from splitting The four sides provide more surface area for exceptional holding power Tem
$7.69/EACH
$7.69/EACH
$26.19/EACH
$26.19/EACH
10F1 1LB 10D BRT FINISH
Finishing nails smooth shank bright finish size pw lgth 10 inches
$5.79/EACH
$5.79/EACH
10HGC1 1LB 10D GALV COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than sta
$6.59/EACH
$6.59/EACH
10HGC5 5LB 10D GALV COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than sta
$23.79/EACH
$23.79/EACH
10HGF1 1LB 10D GALV FINISH
Prime Source Galvanized Finishing Nails are used for construction, carpentry, & framing. Smooth, uncoated shank provided greater strength.
$6.49/EACH
$6.49/EACH
10HGRSPD1 1LB 10D GALV RING DECK
Pressure Treated Ring Shank Lumber Nails - Double hot-dip galvanized ring shank nails for the new treated lumber.
$6.79/EACH
$6.79/EACH
10HGRSPD5 5LB 10D GALV RING DECK
Decking nails are used to secure joists in decking applications. They prevent withdrawal and pull-through. Steel is strong and durable but less corrosion resistant than stainless steel.
