Products
112EGRFG5 5LB 1-1/2IN E.G.ROOF NAIL
Prime Source Electrogalvanized Roofing Nails are used for roofing asphalt shingles, insulation board, & felt to substrates. Large head & heavier shank gauge provide greater holding power.
$18.29/EACH
$18.29/EACH
112TFMAS1 1LB 1-1/2IN FLUTED MASONRY
Prime Source Fluted Masonry Nails are used for securing wood framing or furring strips to brick on concrete. Tempered hardened steel.
$8.79/EACH
$8.79/EACH
112TFMAS5 5LB 1-1/2 IN FLUTED NAIL
Masonry nails are used to fasten wood to concrete. Steel is strong and durable but less corrosion resistant than stainless steel.
$28.69/EACH
$28.69/EACH
114ATRMW4 4OZ 1-1/4 ALU TRIM WH
Use to fasten materials outdoors Aluminum material 1-1/4 in. long White coloring
$6.99/EACH
$6.99/EACH
114ATUL1 1LB 1-1/4IN UNDRLAYMNT
Used to lay plywood or composition underlayment over wood floor or floor joists
$7.69/EACH
$7.69/EACH
114EGRFG1 1LB 1-1/4IN E.G.ROOF NAIL
Large head for greater holding.-Sharp point and thin shank for easy penetration.-Recommended with cedar or redwood.
$5.39/EACH
$5.39/EACH
114EGRFG5 5LB 1-1/4IN E.G.ROOF NAIL
For applying roofing asphalt shingles, insulation board, and felt to wood substrates Large head and heavier shank gauge provide greater holding power Electro Galvanized nail also appropriate fo
$17.89/EACH
$17.89/EACH
114HGFS1 1LB 1-1/4IN GALV STAPLE
Recommended for cedar or redwood. Made from bent wire with points on both ends. Most often used during installation of wire fencing or netting.
$7.39/EACH
$7.39/EACH
$6.49/EACH
$6.49/EACH
114HGJST5 5LB 1-1/4IN GALV TRUSS
The Grip-Rite #9 x 1-1/4 in. Galvanized Steel Joist Hanger Nails (5 lb.-Pack) are used to attach joist hangers to a wood member. The nails are galvanized for weather and rust resistance.
$21.99/EACH
$21.99/EACH
12C1 1LB 12D BRT COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than sta
$5.49/EACH
$5.49/EACH
12CTDSKR1 1LB 12D CC SINKERS
Sinker nails are used to fasten plywood flooring. They are countersunk and lie flush against the workpiece. Steel is strong and durable but less corrosion resistant than stainless steel.
$5.29/EACH
$5.29/EACH
12CTDSKR5 5LB 12D CC SINKERS
Sinker nails are used to fasten plywood flooring. They are countersunk and lie flush against the workpiece. Steel is strong and durable but less corrosion resistant than stainless steel.
$18.39/EACH
$18.39/EACH
12CUTMAS1 1LB 12D HARD CUT MASONRY
Masonry nails are used to fasten wood to concrete. Steel is strong and durable but less corrosion resistant than stainless steel.
$7.69/EACH
$7.69/EACH
12HGC1 1LB 12D GALV COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than sta
$6.59/EACH
$6.59/EACH
12HGC5 5LB 12D GALV COMMON
Common nails are construction wire nails with a disk-shaped head that is typically three to four times the diameter of the shank. Steel is strong and durable but less corrosion resistant than sta
$23.79/EACH
$23.79/EACH
12HGF1 1LB 12D GALV FINISH
Similar to finishing nail with thicker shank, more angular head. For adding casings around doors, setting flooring, heavy exterior trim, and window frames. Galvanized finish prevents corrosion
$6.49/EACH
$6.49/EACH
$8.29/EACH
$8.29/EACH
134HGSK1 1LB 1-3/4 CEDR SHAKE NL
Double Hot Dipped Ring Shank Cedar Shake Nail.
