Tri-Flute Design For Faster Chip Ejection, Cutting Spurs Have Three Cutting Edges For Added Durability, Full Screw Tip Allows Bit To Self Feed. Grooved Hex Shank Prevents Slipping In Drill Chuck Or Bit Extension; Fits All Standard 1/4" Quick Change Chucks.

Deep Penetrating Waterproofer, Combined With Dual-Action UV Protection And A Mold, Mildew And Algae Resistant Coating. Covers Approximately 100-250 Sq Ft Per Gallon.

Standard Base Incandescent. 5-3/8" Overall Length. 120 Volts.

Premium Contractor Grade For Painting And Cleaning, Wallpapering And Removal, Leaf Collection As Well As Absorbing Spills. 8 Oz Canvas.

CONCRETE SEALER EXTERIOR - NATURAL LOOK WATER-BASED Size =Gallon Forms a waterproofing seal on concrete, brick, masonry, aggregate, natural stone and pavers. Formulated to protect against the sun's UV rays, water, gasoline and de-icing salts. Protective sealer allows the natural look of the surface to come through.

Highest Quality EPDM Rubber Seals Out Drafts, Dust And Moisture Around Doors And Windows. Self-Adhesive Application. Use For Medium Gaps. Remains Flexible From -40 Degrees Fahrenheit To 140 Degrees Fahrenheit.

Designed For Attaching Fiber Cement Backerboard To Wood Or Light Gauge, 26 - 20, Steel. No Pre Drilling Necessary. #2 Square Drive Prevent Bit From Slipping. Applications: Bathtub/Shower, Countertops, Floors, Sink Backsplash. Includes Square Drive Bit.

Use For Marking Concrete, Pavement, Gravel, Grass, And More. Use To Mark The Location Of Underground Utilities At Construction And Excavation Sites Where Identification Is Desired. Features A Precision-Line Spray Tip For Easy-To-Read, Bright, Vivid Markings. Can Be Applied Down To 25-Degree Fahrenhiet. Dries In Less Than 5 Minutes. Spray-Through Cap. Tip Keeps Paint Off Fingers. Use With Sku#826.4608. Can Be Used In USDA Facilities Based On FSIS Directive 11,000.4 (Rev. 1), November 24, 1995. Covers Approximately 600-700 Linear Feet At 1 In. Wide.

With Thread Protection On All Pipe Thread.

Blades Are 1 Inch Tall For Straight, Fast Cutting And With The Ability To Flex In Tight Cutting Situations. Heat Treating Process Extends The Life Of The Blades. The 18 Teeth Per Inch Blade Should Be Used On Material 1/8 Inch Through 3/16 Inch Thick. Applications: Demolition, Plumbing, Remodeling, General Metal Cutting, Cuts Pipe, Channels, Tubing, Angle Iron Up To 4 In., Nail Embedded Wood, & Steel.