WE HAVE THE EDGE ON YOUR DECK

When it comes to finishing the sides of your deck, nothing beats the beauty, durability and low maintenance of high-performance Trex® Fascia and stair risers–now available to match every one of our Trex decking lines, and for the first time ever, a go-with-anything high-performance white.

KEY ADVANTAGES

• Low maintenance with no sanding, staining or painting required
• Impact resistant for long-lasting beauty
• Premium design matches any composite, wood or  PVC decking

Round plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, etc.

1 in. x 12 in. WR CEDAR STK S1S2E

Western Red Cedar select tight knot lumber grade has a lot of character and is commonly used on siding, interior paneling and almost any application. The knots and other natural features of the wood define the visual character of this grade; wherein the knots were describe as sound and tight.

Item # 112C

Includes Two Brass-Plated Bolts, Two Washers And Two Nickel-Plated Nuts.

This Clear Finger-Jointed Primed Pine is a perfect product for many uses, especially for painting. Some of the many uses are fascia, corner boards, trim base molding, furniture parts, shelving, cabinets etc. It is pre-primed for your convenience with two coats of high quality factory applied primer.

Drywall Corner Trim, Finishes Short Run Off-Angles Of Any Length With A Narrower Flange, Straight Precise Lines, Built-In Flexible Hinge Adjusts To Fit, Any Inside Or Outside Corner Angle. Flange Width Hides Irregular Framing. 3.25" Wide X 100' Roll.

Designed To Protect Decks And Outdoor Furniture Made From Dense, Oily Hardwoods, Such As Mahogany, Teak And Other Exotic Wood Surfaces. Penetrates Deep Into The Dense, Resin-Rich Hardwoods To Accentuate Natural Wood Depth And Patina. Delivers Three-Way Oil Protection. Dries To A Flat, Translucent-Toned Finish. On Smooth Surfaces, Covers 400-600 Sq. Ft. Per Gallon; On Rough Surfaces Covers 250-350 Sq. Ft. Per Gallon.

The finish washer has an increased bearing surface and the sunken design gives a clean appearance. It's used in applications where the decorative appearance is important. The called out size is the inner diameter of the washer.

• For use with flat or oval head screws
• Washers help to prevent bolts or nuts from pulling through a surface
• Stainless steel material
• Also called a trim or cup washer

The finish washer has an increased bearing surface and the sunken design gives a clean appearance. It's used in applications where the decorative appearance is important. The called out size is the inner diameter of the washer.

• For use with flat or oval head screws
• Washers help to prevent bolts or nuts from pulling through a surface
• Stainless steel material
• Also called a trim or cup washer

• Freud straight bits cut smoother than other bits because of the precise shear and hook angles
• End of bit relief allows for fast plunging
• Cuts all composite materials, plywoods, hardwoods, and softwoods
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
• Double flute straight drill bit
• Cuts smoother than other bits because of the precise shear and hook angles
• End of bit relief allows for fast lunging
• Cuts all composite materials, plywoods, hardwoods and softwoods