• 16" x 20'
• Use as a flashing or termite barrier
• .0144" thick
• Compatible with all ACQ pressure treated lumber
• Lightweight flexible, conforms to any surface
• Will not corrode or degrade like aluminum flashing
• Looks great on sills and trim flashing applications
• 3 oz. copper asphalt laminated to a sheet of creped Kraft paper reinforced with fiberglass scrim to meet government requirement
• Chemical free
• Use copper or stainless steel nails

• 12" x 20'
• Use as a flashing or termite barrier
• .0144" thick
• Compatible with all ACQ pressure treated lumber
• Lightweight flexible, conforms to any surface
• Will not corrode or degrade like aluminum flashing
• Looks great on sills and trim flashing applications
• 3 oz. copper asphalt laminated to a sheet of creped Kraft paper reinforced with fiberglass scrim to meet government requirement
• Chemical free
• Use copper or stainless steel nails

• 10" x 20'
• Use as a flashing or termite barrier
• .0144" thick
• Compatible with all ACQ pressure treated lumber
• Lightweight flexible, conforms to any surface
• Will not corrode or degrade like aluminum flashing
• Looks great on sills and trim flashing applications
• 3 oz. copper asphalt laminated to a sheet of creped Kraft paper reinforced with fiberglass scrim to meet government requirement
• Chemical free
• Use copper or stainless steel nails

• For indoor and framing applications
• 21-degrees plastic collation
• Vinyl coating makes fastener easier to drive
• Smooth shank

• Full hard carbon steel construction to prevent the nail from bending during installation
• Covers 200 Sq Ft
• Use for a variety of applications including T&G Wood Flooring, decorative paneling and ceiling, sub-flooring
• Made in the USA
• 15 gauge construction to prevent the nail from bending during installation
• Packed 1000 per carton

• 16-gauge medium crown staples
• Fits the Hitachi N5010A stapler
• Ideal for jobs such as insulation, carpet underlaying and roofing felt
• Has a 2 in. length, 1/2 in. crown and comes in a 10,000 per pack

• 16GA, 1/2" crown, 1-1/2" length staples
• Comparable and similar to Bostitch 16S4 1/2" medium crown staples
• Steel is electrogalvanized to resist rust and corrosion
• This high tensile strength staple is designed for fewer jams and better reliability
• 10000 staples per box

• High quality galvanized staple
• Excellent strip integrity provides superior holding power
• Chisel Point Staple
• 5/8IN-23G
• 3M

• High quality galvanized staple
• Excellent strip integrity provides superior holding power
• Chisel Point Staple
• 3/4IN-23G
• 3M

These Micro pins fit many brands of pinners. The advantages of this ultra-slim fastener are no holes to fill, no large head showing on finished products, and the ability to get into tight spaces. Often used in conjunction with an adhesive.

• 23-gauge pin nails
• Fits GRTPIN23 and most other 23-gauge pinners
• Directional arrow ensures you load correctly every time
• No head means a hole to putty on finished surface