5/16" - 18 X 3" Steel Washers, Hex Nuts, Wing Nuts And Rubber Washers.

This Clear Finger-Jointed Primed Pine is a perfect product for many uses, especially for painting. Some of the many uses are fascia, corner boards, trim base molding, furniture parts, shelving, cabinets etc. It is pre-primed for your convenience with two coats of high quality factory applied primer.

Drywall Corner Trim, Finishes Short Run Off-Angles Of Any Length With A Narrower Flange, Straight Precise Lines, Built-In Flexible Hinge Adjusts To Fit, Any Inside Or Outside Corner Angle. Flange Width Hides Irregular Framing. 3.25" Wide X 100' Roll.

Designed To Protect Decks And Outdoor Furniture Made From Dense, Oily Hardwoods, Such As Mahogany, Teak And Other Exotic Wood Surfaces. Penetrates Deep Into The Dense, Resin-Rich Hardwoods To Accentuate Natural Wood Depth And Patina. Delivers Three-Way Oil Protection. Dries To A Flat, Translucent-Toned Finish. On Smooth Surfaces, Covers 400-600 Sq. Ft. Per Gallon; On Rough Surfaces Covers 250-350 Sq. Ft. Per Gallon.

The finish washer has an increased bearing surface and the sunken design gives a clean appearance. It's used in applications where the decorative appearance is important. The called out size is the inner diameter of the washer.

• For use with flat or oval head screws
• Washers help to prevent bolts or nuts from pulling through a surface
• Stainless steel material
• Also called a trim or cup washer

The finish washer has an increased bearing surface and the sunken design gives a clean appearance. It's used in applications where the decorative appearance is important. The called out size is the inner diameter of the washer.

• For use with flat or oval head screws
• Washers help to prevent bolts or nuts from pulling through a surface
• Stainless steel material
• Also called a trim or cup washer

• Freud straight bits cut smoother than other bits because of the precise shear and hook angles
• End of bit relief allows for fast plunging
• Cuts all composite materials, plywoods, hardwoods, and softwoods
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
• Double flute straight drill bit
• Cuts smoother than other bits because of the precise shear and hook angles
• End of bit relief allows for fast lunging
• Cuts all composite materials, plywoods, hardwoods and softwoods

Perfect product for many uses, especially for painting. Some of the many uses are fascia, corner boards, trim base molding, furniture parts, shelving, cabinets etc. It is pre-primed for your convenience with two coats of high quality factory applied primer. 

• Span and exposure rated sheathing
• Provides dimensional stability and stiffness
• Edge seal helps prevent moisture intrusion

Use to achieve durable, straight and crisps, clean 90-degree outside finished drywall corners. Hot-dipped galvanized coating offers superior corrosion protection. Strong metal reinforcement for drywall corners. Exposed nose of the bead resists impact andforms a screed for finishing. For humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Nail, staple or clinch into place.