Products
$1.99/EACH
$1.99/EACH
$3.79/EACH
$3.79/EACH
SCH-40 PVC 4"X10' PIPE DWV 70041
Solvent Weld, Use For Drain-Waste-Vent Applications, Or With Pressure Fittings For Pressure Pipe Applications.
$47.58/EACH
$47.58/EACH
TTSGB121221 12"SQUARE GRATE
Used to drain excess water away from lawns and landscape
$25.99/EACH
$25.99/EACH
$10.99/EACH
$10.99/EACH
1/2X11/2 GALV NIPPLE
The MUELLER GLOBAL 1/2 in. x 1-1/2 in. Galvanized Steel Nipple should be installed according to your local building codes and has a male-threaded connection that complies with ANSI B1.20.1 standards.
$1.99/EACH
$1.99/EACH
0902SDB/09117K 9SQR GRATE BL
Made of highest quality structural foam polyethylene with UV inhibitor.
$24.99/EACH
$24.99/EACH
$7.99/EACH
$7.99/EACH
0909SD2/09208K 9"CTCHBASIN2WAY
A Diverse Selection Of Catch Basins Is Available To Solve Any Drainage Problem And Are Used Because The Larger Sump Areas Are Suitable When Runoff May Contain Debris. Two Way Opening. ]
$25.99/EACH
$25.99/EACH
$21.99/EACH
$21.99/EACH
1/2 X 8 GALVANIZED NIPPLE
The MUELLER GLOBAL 1/2 in. x 8 in. Galvanized Steel Nipple has a male-threaded connection and complies with ANSI B1.20.1 standards.
$3.99/EACH
$3.99/EACH
33402 PLASTIC TEST PLUG 3IN
Plastic Mechanical Plug Designed To Hold Higher Pressures. Used For Plugging Open Ended Piping As Protection From Dirt, Dust, Or Debris. Maximum Allowed Air Is 5 PSIG
$7.99/EACH
$7.99/EACH
$44.99/LGTH
$44.99/LGTH
FSDP-EO STORM DRAIN END OUTLET
End Outlet Slides Into The Female End Of The Channels. It Also Has Tabs To Fit Into The Male End Of The Channels Or The Cut-To-Length End Of The Channels.
$11.99/EACH
$11.99/EACH
7005P TUBING 3/8IDX1/2OD 100FT
Samar's versatile Clear Vinyl Tubing can be used for beverage dispensing, potable water, laboratory tubing, drain lines, water transfer, and numerous low pressure applications.
$28.99/ROLL
$28.99/ROLL
1/2X8 BLACK IRON NIPPLE
LDR 302 12X8 Black Pipe Nipple 1/2-Inch X 8-Inch. 1/2-Inch X 8-Inch Black Malleable Pipe nipple. Hydrostatic tested and Protected from corrosion with varnish.
$3.79/EACH
$3.79/EACH
$2.79/EACH
$2.79/EACH
SCH-40 PVC 2"X10' PIPE DWV 70021
Solvent Weld, Use For Drain-Waste-Vent Applications, Or With Pressure Fittings For Pressure Pipe Applications.
$16.63/EACH
$16.63/EACH
33403 PLASTIC TEST PLUG 4IN
Plastic Mechanical Plug Designed To Hold Higher Pressures. Used For Plugging Open Ended Piping As Protection From Dirt, Dust, Or Debris. Maximum Allowed Air Is 5 PSIG