A dedicated range of Top Flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation.
ITS - The innovative ITS sets a new standard for engineered wood top flange hangers. The ITS installs faster and uses fewer nails than any other EWP top flange hanger. The new Strong-Grip™ seat and Funnel Flange™ features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2".
A dedicated range of Top Flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation.
ITS - The innovative ITS sets a new standard for engineered wood top flange hangers. The ITS installs faster and uses fewer nails than any other EWP top flange hanger. The new Strong-Grip™ seat and Funnel Flange™ features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2".
A dedicated range of Top Flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation.
ITS - The innovative ITS sets a new standard for engineered wood top flange hangers. The ITS installs faster and uses fewer nails than any other EWP top flange hanger. The new Strong-Grip™ seat and Funnel Flange™ features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2".
Designed for HVAC system installations, our fiberglass mesh tape is excellent when employed to bolster seams, joints and junctions especially where mastic is painted on.
Keep your insulation firmly in place with the Simpson Strong-Tie Insulation Supports. The insulation supports are cut from carbon steel, spring wire for optimum flexibility and strength. Mitered tips dig into the wood, securing itself and insulation when installed between joists.
Keep your insulation firmly in place with the Simpson Strong-Tie Insulation Supports. The insulation supports are cut from carbon steel, spring wire for optimum flexibility and strength. Mitered tips dig into the wood, securing itself and insulation when installed between joists.
3/8" IPE Plugs are straight sided wood plugs that fit 3/8" holes on Ipe wood decking, Ipe stairs, boat decks, outdoor furniture and other projects. 3/8" IPE Plugs have flat top, straight sides and slight camfer on bottom for easy installation. Side grain (face grain) helps repel water. All deck plugs are 3/8" tall. Simply tap in with a rubber mallet or similar tool.
Baffles are used for ventilation to channel cold and hot air to roof vents and to keep insulation from blocking the soffit area.Poly-Vent Baffle are light-weight, flexible, economical and are easily installed with staples. The vents are 48" long. They are 22" wide, including a staple flange on each side, for use in 24" on center areas. The 22" wide vents are perforated down the center, so that the vent can be snapped in half for use in 16" on center areas. They won’t warp, rot or discolor. The 22" vents (doubles) are sold in bags of 50.
9-1/2 in. x 20 ft. 40 SERIES I-JOIST (2.5” SOLID SAWN FLANGE)
Advantages:
IB I-Joists are light in weight, easy to handle, strong and span long distances (up to 52 ft.), making them more labor and material cost efficient than solid lumber. Manufactured under climate controlled conditions, IB I-Joists are also:
9-1/2 in. x 18 ft. 40 SERIES I-JOIST (2.5” SOLID SAWN FLANGE)
Advantages:
IB I-Joists are light in weight, easy to handle, strong and span long distances (up to 52 ft.), making them more labor and material cost efficient than solid lumber. Manufactured under climate controlled conditions, IB I-Joists are also:
