All hangers in this series have double shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection.
Features
11-7/16" Minimum Heel Height
12 Gauge
3-5/8"W x 12-7/16"H x 4"B
Use with 16d Fasteners
Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)
All hangers in this series have double shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection.
Features
8-7/16" Minimum Heel Height
12 Gauge
3-5/8"W x 9"H x 4"B
Use with 16d Fasteners
Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)
Simpson Strong-Tie offers a wide variety of bolted holdowns offering lowdeflection performance for a range of load requirements. All of these holdowns have been tested in accordance with ICC-ES's AC 155 acceptance criteria and are approved for use in vertical and horizontal applications.
The HD3B is a light-duty holdown designed for use in shearwalls and braced-wall panels, as well as other lateral applications.
Hurricane Tie is made of 18-gauge galvanized steel for strength and durability. It attaches the rafter or truss to the studs and is designed to help counter the effect of high wind and seismic events on a structure.
The H2.5A is designed for easy installation, with higher uplift loads to meet new code requirements. It was designed to help counter extreme winds generated by nature.
Install in pairs to connect 2 x rafter to top plate
Provides resistance to uplift and lateral forces
Z-Max galvanized for extra corrosion resistance.
Install with 5-8d x 1 ½ inch nails to rafter; 5-8d x 1 ½ inch nails to plate
